2004 Arctic Cat ATVs factory service and repair manual, Page 493Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 493

2Place the handlebar into position and secure with the handlebar caps (blocks)Tighten the four cap screws to 2.8 kg-m (20
switch into position; then place the console in position and secure with the screws, spacer, and the retaining ring (opposite
the screw) 5On the 4001500 models7 secure the front of the instrument pod with cap screws 6Place the steering post bearing
flange into positionSecure with the cap screws tightened to 2.8 kg-m (20 ft-lb) Page: 493 Arctic Cat ATV 2004 -All Models