2004 Arctic Cat ATVs factory service and repair manual, Page 497Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 497

WNOTE: During assembling, new cotter pins should be installed 3Install new seal into the knuckle making sure the seal is
the knuckle to the upper and lower ball joints and secure with the two cap screwsTighten to 4.8 kg-m (35 ft-lb) 8Install
the hub assembly onto the splines of the shaft 6Install the tie rod end and secure with the nutTighten to 4.2 kg-m (30 ft-lb);