2004 Arctic Cat ATVs factory service and repair manual, Page 500Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 500

11The difference in the measurements must show 6.4 mm (114 in toe-in (the front measurement 6.4 mm (114 in less than the
make sure the ball ioints are at the center of their normal range of motion and at the correct angle 9Measure the overall
width of the front tires (at height parallel to the belly panel) at the front side; then record the measurement10Push the
ATV forward until the marks are parallel to the belly panel on the back side; then measure the overall width of the front