2004 Arctic Cat ATVs factory service and repair manual, Page 508Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 508

Front Bumper Assembly REMOVING IRemove the headlights with the front bumper 1Remove the main wiring harness connectors from
mounting bosses for stripping4Inspect the wiring harness and headlights for damage 5Inspect the screen for damage or air-flow
obstructions 4Remove the four cap screws securing the front skid plate to the front bumper5Remove the two cap screws securing
the front bumper to the frame INSTALLING 1Place the front bumper assembly into position on the frame and secure with four
cap screwsTighten securely2Secure the front skid plate to the front Dimmer with the four cap screwsTighten securely3Place
the two fender extension studs through the front bumper and secure with the existing push nuts 6Remove the two cap screws