2004 Arctic Cat ATVs factory service and repair manual, Page 513Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 513

CSecure the fuse panel to the fender with the two screwsTighten securely3Secure the fender to the frame and footrests with
screws (A and B)Tighten cap screws to 2.8 kg-m (20 ft-lb) Side Storage Box (TBX Models) REMOVING Pull the cargo box latch
knob (located on the left side between the cargo box and the rear tire) and fully raise the cargo boxPull the seat lock lever
forward (located below the right side of the seat), raise the front end of the seat, and slide it forward and off the ATVRemove
the two cap screws (located inside the side storage box) securing the box to the footrestRemove the screw securing the box
to the side panelRemove cap screws (A and B) securing the box to the frameSecure the box to the side panel with the existing
screwSecure the box to the footrest with existing hardwareTighten securelyInstall the seatLower the cargo box and press down
firmly on the front of the boxThe cargo box will automatically lock into position Cargo Box (TBX Models) REMOVING 1Pull the
cargo box latch knob (located on the left side between the cargo box and the rear tire) and fully raise the cargo box Page: