2004 Arctic Cat ATVs factory service and repair manual, Page 520Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 520

Hand Brake Lever Master Cylinder Assembly I NOTE: The master cylinder is non-serviceable component; it must be replaced as
2Place an absorbent towel around the connection to absorb brake fluidRemove the brake hose from the master cylinder INSPECTING
I NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Inspect the pin securing
the brake lever for wear2Inspect the brake lever for elongation of the pivot hole 3Inspect the reservoir for cracks and leakage
4Inspect the brake hose for cracks and deterioration and the condition of the fittings (threaded and compression) Brake fluid
is highly corrosiveDo not spill brake fluid on any surface of the ATV 5Inspect the brakelight switch for corrosion, cracks,
missing or broken mounting tabs, or broken and frayed wiringI NOTE: If the brakelight switch is determined to be not serviceable,