2004 Arctic Cat ATVs factory service and repair manual, Page 527Get this manual

2004 Arctic Cat ATVs factory service and repair manual, Page 527

INever reuse lock nutOnce lock nut has been removed, it must be replaced with new lock nut INSTALLING 1Place the shift rod
on the axle 7Using two open-end wrenches, remove the lock nut (B) securing the shift rod to the upper shift armRemove the
shift rod and discard the lock nut 3Place the spring into position between the upper shift arm and shift lever; then making
sure the O-rings are in place on the axle, secure the shift lever to the arm with the existing axle and nut4Install the gear
shift linkage cover on the fender in the left-front wheel wellTighten the three machine screws securely 5Place the left-side
panel into position on the frame and secure with the three machine screws 6Install the gas tank (see Section 4); then install