2005 Arctic Cat ATVs factory service and repair manual, Page 12Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 12

8On liquid cooled models, fill the cooling system to the bottom of the stand pipe in the radiator neck with properly mixed
and hours of trouble-free ridingArctic Cat recommends the following procedure to prepare the ATV1Clean the ATV thoroughly2Clean
the engineRemove the cloth from the exhaust system 7Check the entire brake systems (fluid level, pads, etc, all controls,
headlights, taillight, brakelight, and headlight aim; adjust or replace as necessary 8Tighten all nuts, bolts, cap screws,
and screws making sure all calibrated nuts, cap screws, and bolts are tightened to specifications9Check tire pressureInflate
to recommended pressure as necessary10Make sure the steering moves fi-eely and does not bind11Check the spark plugClean or
replace as necessary12Follow the recommendations found in the pre-start inspection 3Check all control wires and cables for