2005 Arctic Cat ATVs factory service and repair manual, Page 26Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 26

INOTE: On the 400 FISIACT, the seat assembly, side panels, and gas tank must be removed for this procedure 1Remove the timing
accurately could cause valve component damage ValveITappet Clearance (Valve Adjuster Procedure) VALVETAPPET CLEARANCE (250)
Intake Exhaust 0.03-0.08 mm (0.001-0.003 in 0.08-0.13 mm (0.003-0.005 in INOTE: For the 650 V-Twin, see Valveflappet Clearance
(650 V-Twin) in this section11 VALVETAPPET CLEARANCE (300) Intake Exhaust 0.03-0.08 mm (0.001 -0.003 in 0.17-0.22 mm (0.007-0.009
inTo check and adjust valveltappet clearance, use the following procedureI NOTE: On the 2501300, the seat and air-intake
snorkel must be removed for this procedureI NOTE: On the 400 FISIACT, the seat assembly, side panels, and gas tank must be
removed for this procedureI NOTE: On the TBW5001650 HI, the seat, storage compartment cover assembly, compartment box, air
filterlfilter housing, and left-sidelright-side splash panels must be removed for this procedure VALVEflAPPET CLEARANCE (4001500)