2005 Arctic Cat ATVs factory service and repair manual, Page 36Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 36

4Place the oil strainer into position beneath the crankcase and secure with the Phillips-head cap screwsTighten securelyA
to the Periodic Maintenance ChartWhen changing the lubricant, use approved SAE SOW-90 hypoid gear lubeTo check lubricant,
use the following procedure1On FIS models, remove the rear drive filler plug; the lubricant level should be inbelow the threads
of the plugIf low, add SAE approved SOW-90 hypoid gear lube as necessary 2On ACT models, remove the rear drive inspection
plug; the lubricant level should be at the threads of the plugIf low, add SAE approved SOW-90 hypoid gear lube as necessary