2005 Arctic Cat ATVs factory service and repair manual, Page 46Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 46

Hydraulic Brake Systems ADJUSTING LINKAGE I NOTE: Prior to attempting to bleed the hydraulic auxiliary brake (remote reservoir
with the hole in the pedal lever CHECKINGIBLEEDING The hydraulic brake systems have been filled and bled at the factoryTo
check andor bleed hydraulic brake system, use the following procedure1With the master cylinder in level position, check the
fluid level in the reservoirIf the level in the reservoir is not visible in the sight glass, add DOT brake fluidSight Glass-
I NOTE: If the holes align, no adjustment is necessary; proceed to step 4 3If the holes are not aligned, loosen the upper