2005 Arctic Cat ATVs factory service and repair manual, Page 51Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 51

2Place the V-belt into position on the driven clutch and over the front shaft 4Remove the V-beltI NOTE: The arrow on the
by pushing the inner face toward the engine while turning it counterclockwise; then when the faces are separated, insert
wedge (approximately 318 inthick) between the facesRelease the inner faceI NOTE: At this point, the wedge can be removed
from between the driven clutch faces 4Rotate the V-belt and clutches until the V-belt is flush with the top of the driven