2005 Arctic Cat ATVs factory service and repair manual, Page 67Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 67

20Disconnect the main wiring harness connectors 28Secure the upper rear of the ATV to the support stand using tie-down straps
rear wheels 22Remove the rear hydraulic brake caliper23Remove the auxiliary brake24Remove the torx-head screw securing the
brake hose to the upper suspension arm25Remove the two oil cooler hoses from the engine26Remove the skid plate from the rear
end assembly27Remove the two lower cap screws securing the sub-framelengine assembly to the frame 30Remove the cap screw
securing the front engine mount to the sub-frameAccount for spacers3 1Remove the upper shock mount cap screw to allow access
for removal of the two rear engine mount cap screws32Remove the two rear cap screws and flat washers securing the engine