2005 Arctic Cat ATVs factory service and repair manual, Page 68Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 68

Top-Side Components I NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
If removing the valve cover only, the two cap screws wlrubber washers next to the compression release lever do not have to
be removed I NOTE: The engineltransmission does not have to removed from the frame for this procedure Removing Top-Side Components
AValve Cover BCylinder Head INOTE: Remove the spark plug and timing inspection plug; then using the recoil starter, rotate
the crankshaft to top-dead-center of the compression stroke 3Loosen the cap screw on the end of the chain tensioner; then
remove the two Allen-head cap screws securing the tensioner adjuster assembly and remove the assemblyAccount for gasket 1Remove