2005 Arctic Cat ATVs factory service and repair manual, Page 72Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 72

Removing Left-Side Components ARecoil Starter BStarter Cup CoverIStator Assembly 1Remove the cap screws securing the recoil
an appropriate slide hammer and adapter, remove the left-side cover wlstator assemblyAccount for gasket, two alignment pins,
and starter idler gear spacerI NOTE: For steps 5-21, refer to illustration CC846B (4x4) or to illustration CC873B (2x4) INOTE:
To aid in installing, it is recommended that the assemblies are kept together and IN ORDER 5Remove the nut securing the magneto
rotor to the crankshaft (D) 6Remove the starter idler gear assembly (E); then account for the spacer, the starter idler gear,
and shaft INOTE: Inspect the inside of the left-side cover for any shaft washers that may have come off with the coverMake