2005 Arctic Cat ATVs factory service and repair manual, Page 79Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 79

Center Crankcase Components INOTE: This procedure cannot be done with the engineltransmission the frameComplete Removing
an O-ring 2Remove the right-side cap screws securing the crankcase halvesNote the location of the cap screw with the copper
washer 19Remove the screws securing the oil pump; then remove the pump 3Remove the left-side cap screws securing the crankcase
halvesNote the location of the different-lengthed cap screws4Using crankcase separator and tapping lightly with rubber mallet,
separate the crankcase halvesAccount for two alignment pins and an O-ring and remove washer from the reverse shifting camI
NOTE: To keep the shaftlgear assemblies intact for identification, tap the shafts toward the right-side crankcase half when