2005 Arctic Cat ATVs factory service and repair manual, Page 85Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 85

Measuring Valve GuideIValve Stem Deflection (Wobble Method) 1Mount dial indicator and base on the surface plate; then place
bore; then remove the gauge and measure it with micrometerAcceptable inside diameter range must be within specificationsIf
valve guide is out of tolerance, it must be replacedReplacing Valve Guide To install valve guide, use valve guide installer
and gently drive valve guide with retaining clip into the bore from the valve spring side until the retaining clip just contacts
the cylinder head INOTE: If valve guide is must be replaced worn or damaged, it 1If valve guide needs replacing, insert valve
guide remover into the valve seat side of the valve guideUsing hammer, gently drive the valve guide out of the cylinder head