2005 Arctic Cat ATVs factory service and repair manual, Page 115Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 115

Joining Crankcase Halves 1Verify that the alignment pins are in place and that both case halves are clean and grease freeApply
and the crankcase cap screws noting the location of the different-lengthed cap screws; then tighten only until snugINOTE:
Rotate the shafts back and forth to ensure no binding or sticking occurs while tightening the cap screws 5In crisscrosscase-to-case
pattern, tighten the mm cap screws until the halves are correctly joined; then tighten to specificationsINOTE: Rotate the
shafts back and forth to ensure no binding or sticking occurs 6In crisscrosscase-to-case pattern, tighten the mm cap screws