2005 Arctic Cat ATVs factory service and repair manual, Page 128Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 128

21Depress the spring-loaded lock and push the plunger into the tensioner 24Loosen the adjuster screw jam nuts; then loosen
thin coat of Three Bond Sealant (pln 0636-070) to the mating surface of the valve cover 23Install the cap screw into the
end of the chain tensioner 26Place the valve cover into positionIAt this point, the rocker arms and adjuster screws must
not have pressure on them 27Install the valve cover cap screws into the head noting the locations of any with rubber washers;