2005 Arctic Cat ATVs factory service and repair manual, Page 130Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 130

W NOTE: The washers must be located next to the head of the cap screw 15Tighten the specifications auxiliary caliper Secure
stand when the enginelsub-frame assembly is installed into the frame or severe damage, injury, or death mav result 17Install
the rear fenders, rear rack, and side panels 9Tighten the four upper sub-fiame mounting cap screws in crisscross pattern
to specifications10Tighten the two lower sub-frame mounting cap screws to specifications11Secure the skid plate to the rear
end assemblyTighten securely12Secure the two oil cooler hoses to the engineGHUbbD 18Secure the remaining connectors to the
main wiring harness 13Secure the brake hose holder to the upper suspension arm with tom-head screwTighten securelyTighten