2005 Arctic Cat ATVs factory service and repair manual, Page 154Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 154

Servicing Top-Side Components I NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
in parts-cleaning solvent2Place the valve cover on the Surface Plate (pln 0644-016) covered with #400 grit wet-or-dry sandpaperUsing
light pressure, move the valve cover in figure eight motionInspect the sealing surface for any indication of high spotsA
high spot can be noted by bright metallic finishCorrect any high spots before assembly by continuing to move the valve cover
in figure eight motion until uniform bright metallic finish is attained sealing surface or damage to the camshaft will resultAlways