2005 Arctic Cat ATVs factory service and repair manual, Page 168Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 168

3If any damage to the shoe or any groove wear is noted, the shoe must be replaced 3Maximum driven plate warpage must not
verify the inner race rotates only one direction 3If the inner race is locked in place or rotates both directions, the drive
assembly must be replacedMeasuring Clutch Spring Length 2Drive plate thickness must not exceed minimum specifications3If
the fiber plate tabs are damaged, the plate must be replaced 1Using calipers, measure the overall free length of the clutch
spring 4Inspect the clutch sleeve hub for grooves or notchesIf grooves or notches are present, replace the hubInspecting
Starter Clutch Shoe 1Inspect the starter clutch shoe for uneven wear, chips, cracks, or bums2Inspect the groove on the shoe