2005 Arctic Cat ATVs factory service and repair manual, Page 188Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 188

I NOTE: After placing the primary clutch assembly onto the shaft, pull out on the pressure plate tower to ensure the pressure
the word OUTSIDE for proper placement The clutch sleeve hub and the clutch pressure plate must be seated in the proper positionIf
any of the incorrect positions are used, the hub and plate will have clearance between them and they will not operate properly
11Simultaneously, place the primary clutch assembly and the starter clutch housing on their respective shafts making sure
the sleeve is properly positioned in the primary assembly14Install the starter clutch shoe and washer; then secure with the