2005 Arctic Cat ATVs factory service and repair manual, Page 189Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 189

15Install the release roller assembly making sure the four springs are in position; then using crisscross pattern, tighten
should be taken that the alianmentpins are installed in the right-side cover 16Install the clutch release arm and release
roller guide making sure the release roller and guide are aligned 18Place the gasket and right-side cover into position making
sure the release roller guide remains correctly positioned; then install the fifteen cap screws 17Secure the clutch release
arm with the cap screw coated with blue Loctite #243Tighten securely19Tighten the cap screws in crisscross pattern to specifications20Using