2005 Arctic Cat ATVs factory service and repair manual, Page 204Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 204

Removing Enginel Transmission Many service procedures can be performed without removing the engineltransmission from the
then remove the positive cableRemove the battery hold-down strap and the battery vent hose; then remove the battery 8Remove
the gas tankBattery acid is harmful if it contacts eyes, skin, or clothingCare must be taken whenever handling battery 9Remove
the rear fenders and the rear rack assembly (see Section 8)10Remove the hardware securing the air cleaner housing to the
f?ame 3Near the battery tray, remove the two screws securing the fuse block; then carefully remove all the wiring f?om the
block It is critical that all wiring be marked when removing from the fuse blockThis will aid in installing correctly 4Carefully
guide the battery cables and fuse block wiring down through the access hole into the engine compartment for future removing
5.Drain the oil engineltransmission beneath 11Disconnect the crankcase vent hose f?om the air cleaner housingRemove the clamps