2005 Arctic Cat ATVs factory service and repair manual, Page 208Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 208

Removing Top-Side Components AValve Cover BCylinder Head INOTE: Remove the spark plug and timing inspection plug; then using
tensioner assemblyRemove the tensioner assembly and gasket 1Remove the cap screws securing the two tappet coversRemove the
two tappet coversAccount for the O-rings 4Remove the cam chain tensioner pivot cap screw and washerINOTE: Keep the mounting
hardware with the covers for assembly purposes 2Remove the 12 valve cover cap screwsNote the rubber washers on the four top-side
cap screws; remove the valve coverNote the orientation of the cylinder head plug and remove itNote the location of the two