2005 Arctic Cat ATVs factory service and repair manual, Page 212Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 212

Removing Left-Side Components ARecoil Starter BStarter Cup CCoverlStator Assembly 1Remove the four recoil starter cover cap
if necessaryAccount for the two alignment pins and the position of the shifter bracket for installing purposes, 3Lay the
engineltransmission on its right sideRemove the 14 left-side cover-to-crankcase mounting cap screws noting the location of
the long cap screw with the washer near the middle of the left-side coverKeep the different-lengthed mm cap screws in order
for installing purposes W NOTE: Inspect the inside of the left-side cover for any shaft washers that may have come off with
the coverMake sure they are returned to their respective shafts and that the starter idler gear spacer is on the shaft or