2005 Arctic Cat ATVs factory service and repair manual, Page 214Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 214

10Remove the shift detent camNote position of spacer for installing purposes 11Remove the cam stopper assembly, 12Remove
one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each
sub-sectionW NOTE: The engineltransmission does not have to be removed from the frame for this procedure Removing Right-Side
Components AV-Belt Cover BDriven Pulley CClutch Cover 14Remove starter motor by tapping lightly with mallet15Using an impact
screwdriver, remove the three Phillips-head screws holding the cranksha& bearing retainerRemove the crankshaft bearing retainer,
1If the engine is still in the frame, turn the gas tank valve to the OFF positionRemove the cap screws securing the right-side