2005 Arctic Cat ATVs factory service and repair manual, Page 234Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 234

Servicing Right-Side Components I NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance,
three times to check for correct tensionI NOTE: Increasing the rotations in step 11 will increase spring tension 1Inspect
the starter clutch housing for bums, marks, scuffs, cracks, scratches, or uneven wear 2If the housing is damaged in any way,
the housing must be replacedINSPECTING PRIMARY ONE-WAY DRIVE 13Place the recoil starter assembly into position on the left-side
cover; then tighten the cap screws to specifications 1Insert the drive into the clutch housing 2Rotate the inner race by
hand and verify the inner race rotates only one direction3If the inner race is locked in place or rotates both directions,