2005 Arctic Cat ATVs factory service and repair manual, Page 237Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 237

I NOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed Inspecting
three pins and spacers into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease 4Inspect
the pins and bushings for wear, flat spots, looseness, or crackingAssembling 1Place the fixed face of the driven pulley on
the pulley compressor base making sure the dowel pins are engaged in the appropriate holes in the pulley facePage: 237 Arctic