2005 Arctic Cat ATVs factory service and repair manual, Page 246Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 246

Installing Right-Side Components AOil StrainerIOil Pump 1Place the oil strainer and new O-ring into position beneath the
pump driven gear 2Noting the directional arrow from removing, place the strainer cover into position on the crankcase making
sure the O-ring is properly installed and secure with the four cap screws; then tighten the oil drain plug to specifications
3Place two alignment pins and the oil pump into position on the crankcase and secure with the Phillips-head screws coated
with blue Loctite #243Tighten to specifications 5 Install the ram chainNOTE Keep tension on the cam chain to avoid damaging