2005 Arctic Cat ATVs factory service and repair manual, Page 248Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 248

13Install the air intake plateApply red Loctite #271 to the threads of the three Phillips-head cap screws; then install and
318 inthick) between the facesRelease the inner face 14Place the driven pulley assembly into position and secure with the
nut (threads coated with red Loctite #271)Tighten to specifications17Place the V-belt into position on the driven pulley
and over the front shaft I NOTE: The arrows on the V-belt should point forward Page: 248 Arctic Cat ATV 2005 -All Models