2005 Arctic Cat ATVs factory service and repair manual, Page 262Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 262

13Secure the carburetor assembly up and away from the engine14Remove the E-clip securing the shift rod to the engine shift
the rear output joint flange 15Remove the mounting bolts securing the muffler to the frame; then remove the mufflerAccount
for the graphite bushing IIt is advisable to lock the brake when loosening the cap screws securing the rear driveshaft 19Remove
the positive cable from the starter motor and route it out of the way 16Remove the two cap screws securing the exhaust pipe