2005 Arctic Cat ATVs factory service and repair manual, Page 266Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 266

3Loosen the cap screw on the end of the tensioner; then remove the two Allen-head cap screws securing the tensioner adjuster
and camshaft out of the cylinder head I NOTE: Loop the chain over the cylinder and secure it to keep it from falling into
the crankcase 5Bend the washer tabs down and remove the two cap screws securing the sprocket to the camshaft; then drop the
sprocket off the camshaft 8Remove the five nuts securing the cylinder head to the cylinder; then remove the four cylinder
head cap screws with copper washers (note location of the different-sized cap screws and nuts) Page: 266 Arctic Cat ATV 2005