2005 Arctic Cat ATVs factory service and repair manual, Page 275Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 275

15Using an impact driver, remove the three Phillips-head screws securing the oil pump; then remove the pump 2Remove the right-side
and Right-Side must precede this procedureI NOTE: For efficiency, it is preferable to remove and disassemble only those components
which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment Separating
Crankcase Halves 1Remove the two shift cam stoppers from the top of the crankcase 4Using the Crankcase SeparatorICrankshaft
Remover (pln 0444-009) and tapping lightly with rubber mallet, separate the crankcase halvesAccount for two alignment pinsI