2005 Arctic Cat ATVs factory service and repair manual, Page 280Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 280

2Acceptable diameter range (intake valve) must be within specifications 3Acceptable diameter range (exhaust valve) must be
the dial indicator contact point on the outside edge of the valve face; then zero the indicator 1Support each valve stem
end with the Blocks (pln 0644-022); then check the valve stem runout using dial indicator ATVI 082; 3Rotate the valve in
the blocks4Maximum runout must not exceed specificationsATV-108: Measuring Valve GuideIValve Stem Deflection (Wobble Method)
2Maximum runout must not exceed specificationsMeasuring Valve Stem Outside Diameter 1Mount dial indicator and base on the
surface plate; then place the cylinder head on the surface plate 1Using micrometer, measure the valve stem outside diameter3-226