2005 Arctic Cat ATVs factory service and repair manual, Page 281Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 281

2Using the Standard Valve Guide Reamer (pln 0444-017), remove any burrs or tight areas from the valve guide journals 3Push
112 way down into each valve guide bore; then remove the gauge and measure it with micrometer2Acceptable inside diameter
range must be within specifications3If valve guide is out of tolerance, it must be replacedReplacing Valve GuideIf valve
guide is worn or damaged, it must be replaced 1If valve guide needs replacing, insert valve guide remover into the valve
seat side of the valve guideUsing hammer, gently drive the valve guide out of the cylinder head 4After installing the guide,