2005 Arctic Cat ATVs factory service and repair manual, Page 292Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 292

Servicing Right-Side Components I NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance,
base Inspecting clutch shoe groove ATVI 011 INSPECTING CLUTCH HOUSING 1Inspect the clutch housing for bums, marks, scuffs,
cracks, scratches, or uneven wear 2If the housing is damaged in any way, the housing must be replacedINSPECTING PRIMARY ONE-WAY
DRIVE 1Insert the drive into the clutch housing 2Place the driven pulley assembly onto the compressor tool base engaging
the dowel pins into appropriate holes in the fixed face of the assembly 2Rotate the inner race by hand and verify the inner
race rotates only one direction 3If the inner race is locked in place or rotates both directions, the drive assembly must