2005 Arctic Cat ATVs factory service and repair manual, Page 295Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 295

INOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed 2Apply multi-purpose
the sleeve and into the spring anchor hole in the movable face 6Place the spring holder on the spring engaging the spring
end with the appropriate anchor hole3Install the four pins and spacers into the fixed face hub; then pack the cam slots in
the movable face with multi-purpose grease 7Assemble the notched-ring nut, spring holding handle, one flat washer, and the