2005 Arctic Cat ATVs factory service and repair manual, Page 304Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 304

4Install the oil pump drive gear spacer onto the Installing Right-Side Components 1Install the shift indicator sending unit
the driven gear (noting the direction of the sides of the gear from removing)Secure with snap ring 2Install the secondary
shaft bearing housing making sure the two alignment pins are properly positionedTighten the Allen-head screws securely I
NOTE: When installed correctly, the sides of the drive and driven gears will be flush with each other 3Install the oil pump
onto the engine; then tighten the Phillips-head screws securely 6Install the clutch shoe assembly and secure with the washer
(with the flat side facing the assembly as noted in removing) and the nut (threads coated with red Loctite #271)Tighten to