2005 Arctic Cat ATVs factory service and repair manual, Page 305Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 305

7Lightly grease the clutch housing seal; then insert the left fixed drive spacerWhen installed correctly, the green alignment
screws (threads treated with small amount of red Loctite #271) securely Install the clutch cover alignment pins into the
crankcase, apply oil to the cover gasket, and install the gasket onto the crankcaseApply grease to the outer edges of the
clutch housing; then from inside the clutch cover, install the clutch housing into the cover using rubber malletInstall the
one-way clutch onto the clutch shoe assembly 13Place the driven pulley assembly into position and secure with the nutTighten