2005 Arctic Cat ATVs factory service and repair manual, Page 317Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 317

12Connect the temperature sensor wire to the main wiring harness13Secure the wires to the frame with nylon ties14Connect
hoses to the engine18Secure the crankcase vent hose to the air cleaner housing; then secure the inlet boot and carburetor
to the air cleaner housing20Place the left-side footwell and foot peg in position on the frame; then secure with existing
hardwareTighten to specifications 21Install the front body panel with existing hardware (see Section 8)22Connect the hose