2005 Arctic Cat ATVs factory service and repair manual, Page 320Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 320

Disconnect the crankcase vent hose from the air filter housingLoosen the clamp securing the carburetor intake duct to the
sensor housingRemove the four cap screws securing the rear output joint to the transmission and push the shaft away from
the transmission 17Remove the clamp securing the upper coolant hose to the thermostat housing; then disconnect the hose 15Loosen
the clamp securing the air intake duct to the air filter housing 18Disconnect the high tension lead from the spark plug;