2005 Arctic Cat ATVs factory service and repair manual, Page 344Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 344

4After installing the guide, use the standard valve guide reamer to remove all burrs and tight areas that may remain in each
match valve and seat area check valve head for damaqe purpose FINISHED I NOTE: Do not grind the valvesIf valve is damaged,
it must be replaced 1Remove all carbon from the valves2Lubricate each valve stem with light oil; then apply small amount
of valve lapping compound to the entire seating face of each valve Grinding Valve Seats cylinder head must be replacedI NOTE:
If the valve seat is beyond servicing, the 3Attach the suction cup of valve lapping tool to the head of the valve4Rotate
the valve until the valve and seat are evenly polished5Clean all compound residue from the valve and seat 1Insert an exhaust
valve seat pilot shaft into an exhaust valve guideSlide an exhaust valve seat grinding tool onto the pilot shaft; then using