2005 Arctic Cat ATVs factory service and repair manual, Page 353Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 353

7Install the shaft, spring, and the spring cover 10With the 50 cm (20 in of rope exposed, hook the rope in the notch of the
13Place the recoil starter assembly into position on the left-side cover; then tighten the cap screws to specifications 8Install
the friction plate with the ratchet guide fitting into the ratchet MEASURING SHIFT FORK (Thickness) 9While pushing down on
the reel, install the nutTighten securely I NOTE: Whenever shift fork is out of tolerance, replacement is necessary 1Using