2005 Arctic Cat ATVs factory service and repair manual, Page 355Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 355

Measuring Clutch Drive Plate (Fiber) Thickness Inspecting Primary One-way Drive 1Insert the drive into the clutch housing
hubInspecting Starter Clutch Shoe 1Place the clutch hub upside down into the primary gear assembly 1Inspect the starter clutch
shoe for uneven wear, chips, cracks, or bums2Inspect the groove on the shoe for wear or damage 3If any damage to the shoe
or any groove wear is noted, the shoe must be replaced 2Alternately install the drive plates and driven plates onto the hub
(starting with and ending with drive plate) making sure the tabs with the notches are all in line with each other Inspecting
clutch shoe groove Inspecting Starter Clutch Housing 1Inspect the starter clutch housing for bums, marks, scuffs, cracks,