2005 Arctic Cat ATVs factory service and repair manual, Page 371Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 371

INOTE: Prior to joining crankcase halves, turn the shift cam to ensure all gears shift properly 2Using plastic mallet, lightly
half and verify that the washer is on the idler shaft; then apply Three Bond Sealant (pln 0636-070) to the mating surfacesPlace
the right-side half onto the left-side half IRotate the shafts back and forth to ensure no binding or sticking occurs 4From
the right side, install the three case half mm cap screws; then tighten only until snugIRotate the shafts back and forth