2005 Arctic Cat ATVs factory service and repair manual, Page 377Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 377

2Place the shift-indicator sending unit into position making sure the contacts and springs are inside the case and well-oiled
and spacer 6Place the splined bushing onto the driveshaft making sure the oil hole of the splined bushing aligns with the
oil hole of the driveshaft It is important that the oil holes in the splined bushing and driveshaft alignIf they are not
aligned, major damage will occur from lack of lubrication 4Place the bushing onto the output shaft; then install the driven