2005 Arctic Cat ATVs factory service and repair manual, Page 384Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 384

8Install the four cylinder head cap screws with copper washers (note the locations of the different-lengthed cap screws)Tighten
9) to 1.1 kg-m (8 ft-lb)Tighten the two cylinder-tocrankcase nuts (from step 4) securely11With the timing inspection plug
removed and the chain held tight, rotate the crankshaft until the piston is at top-dead-center12With the alignment pin installed
in the camshaft, loosely place the cam sprocket (with the recessed side facing the cam shaft lobes) onto the camshaftAt this