2005 Arctic Cat ATVs factory service and repair manual, Page 385Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 385

13With the cam lobes directed down (toward the piston), maneuver the camshaftlsprocket assembly through the chain and towards
the camshaftThey must be parallel with the valve cover mating surfaceIf rotating the camshaft is necessary for alignment,
do not allow the chain and sprocket to rotate and be sure the cam lobes end up in the down position 15Place the tab-washer
onto the sprocket making sure it covers the pin in the alignment hole 14Seat the cam sprocket onto the camshaft making sure
the alignment pin in the camshaft aligns with the smallest hole in the sprocket; then place the camshaftsprocket assembly
onto the cylinder ensuring the following 16Install the first cap screw (threads coated with red Loctite #271) securing the